Decorative Flooring & Coatings
Group Code: 600 Series
Great stories have a personality. Consider telling a great story that provides personality. Writing a story with personality for potential clients will assist with making a relationship connection. This shows up in small quirks like word choices or phrases. Write from your point of view, not from someone else's experience.
Great stories are for everyone even when only written for just one person. If you try to write with a wide, general audience in mind, your story will sound fake and lack emotion. No one will be interested. Write for one person. If it’s genuine for the one, it’s genuine for the rest.
WALL DECORATION PRODUCTS
Products are specifically designed to create an ideal underlayment for floors and walls, delivering exceptional benefits:
Surface Imperfection Rectification: Repair, leveling, and surface flattening.
Safety and Sustainability Fortification: Vibration dampening, crack resistance, and noise suppression.
Comfort and Structural Integrity Improvement: Thermal resistance, water resistance, chemical resistance, and longevity extension.
| Used to build a 3-50mm thick smooth finishing surface with high load-bearing capacity, abrasion resistance, pH 4-14 chemical resistance, service tempurature from -25°C to 500°C, thermal shock resistance, etc. Well-suited for floor of factories, warehouses, parking areas, etc. LS400S can be mixed with: |
LS730S Pure mineral silicate binder, original grey powder, high flowability, pumpable using pumping machine, colorable using inorganic water soluble pigments. | Used to build a 5-40mm thick smooth finishing surface with high load-bearing capacity, ultra-high abrasion resistance, pH 4-14 chemical resistance, service tempurature from -25°C to 500°C, thermal shock resistance, etc. Well-suited for floor of factories, warehouses, parking areas, etc. Especially, AGV warehouses floors and ultra-high traffic areas. LS410 UAR can be mixed with: |
LS770S Pure mineral silicate binder, original grey powder, high flowability, pumpable using pumping machine, colorable using inorganic water soluble pigments. | Used to build a 3-30mm thick anti-slip/anti-skid finishing surface with high load-bearing capacity, high abrasion resistance, pH 4-14 chemical resistance, service tempurature from -25°C to 500°C, thermal shock resistance, etc. Well-suited for floor of factories, warehouses, parking areas, etc. Especially for indoor and outdoor parking areas included: parking lots, drive ways, ramp, etc.. LS420 ASL can be mixed with: |
SPECIAL PURPOSE PRODUCTS
Products are specifically designed to create an ideal underlayment for floors and walls, delivering exceptional benefits:
Surface Imperfection Rectification: Repair, leveling, and surface flattening.
Safety and Sustainability Fortification: Vibration dampening, crack resistance, and noise suppression.
Comfort and Structural Integrity Improvement: Thermal resistance, water resistance, chemical resistance, and longevity extension.
LS700S | Used to build a 3-50mm thick smooth finishing surface with high load-bearing capacity, abrasion resistance, pH 4-14 chemical resistance, service tempurature from -25°C to 500°C, thermal shock resistance, etc. Well-suited for floor of factories, warehouses, parking areas, etc. LS400S can be mixed with: |
LS730S Pure mineral silicate binder, original grey powder, high flowability, pumpable using pumping machine, colorable using inorganic water soluble pigments. | Used to build a 5-40mm thick smooth finishing surface with high load-bearing capacity, ultra-high abrasion resistance, pH 4-14 chemical resistance, service tempurature from -25°C to 500°C, thermal shock resistance, etc. Well-suited for floor of factories, warehouses, parking areas, etc. Especially, AGV warehouses floors and ultra-high traffic areas. LS410 UAR can be mixed with: |
LS540S Pure mineral silicate binder, original grey powder, high flowability, pumpable using pumping machine, colorable using inorganic water soluble pigments. | Used to build a 3-30mm thick anti-slip/anti-skid finishing surface with high load-bearing capacity, high abrasion resistance, pH 4-14 chemical resistance, service tempurature from -25°C to 500°C, thermal shock resistance, etc. Well-suited for floor of factories, warehouses, parking areas, etc. Especially for indoor and outdoor parking areas included: parking lots, drive ways, ramp, etc.. LS420 ASL can be mixed with: |
LS550S Hybrid mineral silicate binder, original grey powder, high flowability, pumpable using pumping machine. | Used to build a 3-10mm thick pH 0-14 chemical resistance finishing surface with high load-bearing capacity, high abrasion resistance, service tempurature from -15°C to 200°C, etc. Well-suited for floor of chemical factories, chemcial warehouses, etc.
|
AUXILIARY PRODUCTS
These carefully designed and selected products are for surface preparation, treatment, and protection. Also included are additives as modifiers, enhancing or altering the properties of main products that utilize mineral silicate technologies. This range includes primers, surface repair products, joint fillings products, colorants, densifiers, sealers, working time control agents, viscosity control agents, and more.
LS700S | Used to build a 3-50mm thick smooth finishing surface with high load-bearing capacity, abrasion resistance, pH 4-14 chemical resistance, service tempurature from -25°C to 500°C, thermal shock resistance, etc. Well-suited for floor of factories, warehouses, parking areas, etc. LS400S can be mixed with: |
LS730S Pure mineral silicate binder, original grey powder, high flowability, pumpable using pumping machine, colorable using inorganic water soluble pigments. | Used to build a 5-40mm thick smooth finishing surface with high load-bearing capacity, ultra-high abrasion resistance, pH 4-14 chemical resistance, service tempurature from -25°C to 500°C, thermal shock resistance, etc. Well-suited for floor of factories, warehouses, parking areas, etc. Especially, AGV warehouses floors and ultra-high traffic areas. LS410 UAR can be mixed with: |
LS540S Pure mineral silicate binder, original grey powder, high flowability, pumpable using pumping machine, colorable using inorganic water soluble pigments. | Used to build a 3-30mm thick anti-slip/anti-skid finishing surface with high load-bearing capacity, high abrasion resistance, pH 4-14 chemical resistance, service tempurature from -25°C to 500°C, thermal shock resistance, etc. Well-suited for floor of factories, warehouses, parking areas, etc. Especially for indoor and outdoor parking areas included: parking lots, drive ways, ramp, etc.. LS420 ASL can be mixed with: |
LS550S Hybrid mineral silicate binder, original grey powder, high flowability, pumpable using pumping machine. | Used to build a 3-10mm thick pH 0-14 chemical resistance finishing surface with high load-bearing capacity, high abrasion resistance, service tempurature from -15°C to 200°C, etc. Well-suited for floor of chemical factories, chemcial warehouses, etc.
|
LS110 FPC - Fine Cracks & Pinholes Patching Compound. |
| Used to fill micro-cracks, pinholes, and minor fractures on finished surfaces. Can be mixed with LS310 ICP and LS313 SCP colorants to ensure color matching with the existing surface. |
LS115 JFC - Cracks & Joints Filling Compound. |
| Used to fill cut joints, cracks, expansion joints, or repair surfaces with significant spalling on substrates or finished surfaces. Can be mixed with LS310 ICP and LS313 SCP colorants to ensure color matching with the existing surface. |
LS120 APM - Modified Acrylic Primer. |
| Used to seal pores on base surfaces, preventing subsequent layers from losing moisture and enhancing adhesion between layers. |
LS140 SSS - Special Acid Resistance Densifier. |
| Used to seal pores, densify, and harden surfaces, enhancing the lifespan, acid resistance, waterproofing, and abrasion resistance of the finished layer.
|
LS145 LLS - Silicate Impegnating Clear Sealer. |
| Used to seal the finished surface layer (untreated or treated using LS140 SSS), enhancing its stain and dirt resistance. |
LS190 PCS - Modified PolyUrethane Clear Sealer. |
| Used to seal the finished surfaces, maximizing its stain and dirt resistance also enhanceing the waterproofing. Well-suited for light to medium load-bearing surfaces |
LS191 ACS - Modified Acrylic Clear Sealer. |
|
Used to seal the finished wall surface, maximizing its stain, dirt resistance, waterproofing while enhancing its weather resistance. Well-suited for interior and exterior surfaces.
|
LS197 WPS - PolyUrea Aliphatic Clear Sealer. |
| Used to seal the finished surface, ensuring maximum stain and dirt resistance, and creating an absolute waterproof layer. Well-suited for low-load-bearing dry or submerged surfaces (interior and exterior). |
LS198 WIS - Modified Silicone Clear Sealer. |
| Used to seal the finished surface, ensuring maximum stain and dirt resistance, and creating an absolute waterproof layer. Well-suited for non-load-bearing dry or submerged surfaces (interior and exterior). Particularly effective for precast product surfaces. |
LS310 SCP - Self-dispersing Inorganic Color Pigment. |
| Used to mix with mineral silicate powder finishing products to color the finished surface. It's specially treated for high self-dispersion in powder, anti-lump during storage, and long term color stable due to enhanced anti-aging property. |
LS315 ICP - Inorganic Color Pigment. |
| Used to mix with finished products to color the finished surfaces. It's selected pigment in liquid/paste/powder form which has high color strength, easy do be dispersed and match almost requirements form clients. |
LS340 VAT - Vertical Application Transforming Additive. |
| Used to mix with flowable mineral silicate finishing products to enable them can be apply on vertical surfaces. |
LS341 WTR - Workability Time Reducer Additive. | Used to mix with mineral silicate products to reduce working time, accelerate hardening, and shorten construction time. Particularly effective in low-temperature environments below 15°C. | |
LS342 WTE - Workability Time Extender Additive. | Used to mix with mineral silicate products to extend working time, slow down hardening, and prolong construction time. Particularly effective in high-temperature environments above 35°C. | |
LS343 WIA - Waterproofing Improvement Additive. | Used to mix with mineral silicate products to enhance waterproofing capabilities. Well-suited for areas with high water penetration potential or lacking professional waterproofing layers. | |
LS343 AMF - Anti-Microbial/Fungi Additive. | Used to mix with mineral silicate products to enhance antibacterial and antifungal properties. Well-suited for areas with antibacterial and antifungal requirements. |
Are you prepared to launch your own branded manufacturing business?
Let's turn your vision into reality. Contact us today to set your brand on the path to be a manufacturer with us.